Electrolyser Modelling
#41
Ok, thanks for the files.

It was easy to see where the problem was.  The documentation says the following (bold emphasis added):

2.2.1. Endogenous partial load efficiency losses
It  should  be  noted,  though,  that  the endogenous modelling of partial load efficiencies requires that the process has its efficiency modelled through the ACT_EFF parameter (on the shadow side of the process).

3.2.7. Partial load efficiency losses
It should  be  noted  that  the  modelling  of  endogenous  partial  load  efficiency  losses  requires  that  the
process has its efficiency modelled by the ACT_EFF r,v,t,p,s  parameter (on the shadow side), while the
penalty cost approach can be used for any process, regardless of how the process efficiency has been
modelled.


5.4. USAGE NOTES FOR BASIC PARTIAL LOAD EFFICIENCY MODELLING
The  ACT_LOSPL(r,y,p,'FX')  parameter  can  only  be  used  for  processes  that  have  their  efficiency
modelled  by  the  ACT_EFF  parameter  (on  the  shadow  side).  The  process  efficiency  will  then  be
endogenously modelled according to the actual load level in each timeslice.


You have not defined ACT_EFF on the shadow side. The shadow side is at the opposite of the PCG, and your PCG for the testelsr_new technology is HYGNtcs.  You are defining the efficiency on the PCG:
Code:
PARAMETER ACT_EFF /
REG1.2030.TESTELSR_new.HYGNtcs.ANNUAL 0.017627
REG1.2015.TESTELSR_new.HYGNtcs.ANNUAL 0.017288462
REG1.2050.TESTELSR_new.HYGNtcs.ANNUAL 0.01798
/;
Thus, it is was immediately clear that partial load efficiencies could not be working at all for the technology testelsr_new. I wonder why on earth you are now defining the efficiency on the PCG, while you earlier defined it in the normal way (using EFF in VEDA)?  It is very unusual to define ACT_EFF on the PCG, and is meant only for the special case where you have multiple commodities in the PCG, and you want to have different efficiencies for each of the outputs.

I tested by fixing the ACT_EFF, by raising the starting point for the losses higher, ACT_LOSPL('UP')=0.8, and the process then worked as expected, having large partial efficiency losses in the night timeslices.
Reply


Messages In This Thread
Electrolyser Modelling - by MohammedAbiAfthab - 08-04-2019, 02:43 PM
RE: Electrolyser Modelling - by Antti-L - 08-04-2019, 03:33 PM
RE: Electrolyser Modelling - by Pernille.S - 08-04-2019, 06:58 PM
RE: Electrolyser Modelling - by Antti-L - 09-04-2019, 03:10 AM
RE: Electrolyser Modelling - by MohammedAbiAfthab - 11-04-2019, 05:54 PM
RE: Electrolyser Modelling - by MohammedAbiAfthab - 02-05-2019, 08:08 PM
RE: Electrolyser Modelling - by Antti-L - 02-05-2019, 08:26 PM
RE: Electrolyser Modelling - by MohammedAbiAfthab - 02-05-2019, 09:03 PM
RE: Electrolyser Modelling - by Antti-L - 02-05-2019, 09:36 PM
RE: Electrolyser Modelling - by MohammedAbiAfthab - 03-05-2019, 03:11 PM
RE: Electrolyser Modelling - by Antti-L - 03-05-2019, 03:55 PM
RE: Electrolyser Modelling - by MohammedAbiAfthab - 09-05-2019, 02:24 AM
RE: Electrolyser Modelling - by Anjana - 10-05-2019, 02:08 PM
RE: Electrolyser Modelling - by Anjana - 10-05-2019, 02:20 PM
RE: Electrolyser Modelling - by Antti-L - 05-05-2019, 11:21 PM
RE: Electrolyser Modelling - by MohammedAbiAfthab - 06-05-2019, 01:42 PM
RE: Electrolyser Modelling - by Pernille.S - 06-05-2019, 05:58 PM
RE: Electrolyser Modelling - by Antti-L - 06-05-2019, 07:51 PM
RE: Electrolyser Modelling - by Pernille.S - 07-05-2019, 01:00 PM
RE: Electrolyser Modelling - by Pernille.S - 08-05-2019, 02:21 PM
RE: Electrolyser Modelling - by Antti-L - 08-05-2019, 02:31 PM
RE: Electrolyser Modelling - by Pernille.S - 08-05-2019, 02:35 PM
RE: Electrolyser Modelling - by Antti-L - 09-05-2019, 03:19 AM
RE: Electrolyser Modelling - by MohammedAbiAfthab - 09-05-2019, 03:27 AM
RE: Electrolyser Modelling - by MohammedAbiAfthab - 09-05-2019, 07:32 PM
RE: Electrolyser Modelling - by Antti-L - 09-05-2019, 08:16 PM
RE: Electrolyser Modelling - by MohammedAbiAfthab - 10-05-2019, 01:28 AM
RE: Electrolyser Modelling - by Antti-L - 10-05-2019, 02:55 AM
RE: Electrolyser Modelling - by MohammedAbiAfthab - 10-05-2019, 07:03 AM
RE: Electrolyser Modelling - by Antti-L - 10-05-2019, 02:48 PM
RE: Electrolyser Modelling - by Anjana - 10-05-2019, 03:41 PM
RE: Electrolyser Modelling - by Anjana - 17-05-2019, 12:54 PM
RE: Electrolyser Modelling - by Antti-L - 12-05-2019, 04:31 AM
RE: Electrolyser Modelling - by MohammedAbiAfthab - 15-05-2019, 09:00 PM
RE: Electrolyser Modelling - by Antti-L - 15-05-2019, 10:32 PM
RE: Electrolyser Modelling - by MohammedAbiAfthab - 17-05-2019, 02:20 PM
RE: Electrolyser Modelling - by MohammedAbiAfthab - 17-05-2019, 06:26 PM
RE: Electrolyser Modelling - by Antti-L - 17-05-2019, 01:50 PM
RE: Electrolyser Modelling - by Anjana - 17-05-2019, 02:15 PM
RE: Electrolyser Modelling - by Anjana - 17-05-2019, 07:30 PM
RE: Electrolyser Modelling - by Antti-L - 17-05-2019, 07:37 PM
RE: Electrolyser Modelling - by MohammedAbiAfthab - 17-05-2019, 08:58 PM
RE: Electrolyser Modelling - by Antti-L - 17-05-2019, 10:24 PM
RE: Electrolyser Modelling - by MohammedAbiAfthab - 17-05-2019, 10:49 PM
RE: Electrolyser Modelling - by MohammedAbiAfthab - 06-06-2019, 02:16 PM
RE: Electrolyser Modelling - by Antti-L - 18-05-2019, 09:35 PM
RE: Electrolyser Modelling - by Anjana - 19-05-2019, 02:38 AM
RE: Electrolyser Modelling - by Anjana - 18-05-2019, 11:17 PM
RE: Electrolyser Modelling - by Anjana - 18-05-2019, 11:59 PM
RE: Electrolyser Modelling - by Antti-L - 19-05-2019, 12:28 AM
RE: Electrolyser Modelling - by Anjana - 19-05-2019, 01:15 AM
RE: Electrolyser Modelling - by Anjana - 19-05-2019, 01:19 AM
RE: Electrolyser Modelling - by Antti-L - 19-05-2019, 01:34 AM
RE: Electrolyser Modelling - by Antti-L - 06-06-2019, 10:25 PM
RE: Electrolyser Modelling - by MohammedAbiAfthab - 12-06-2019, 02:58 AM
RE: Electrolyser Modelling - by Antti-L - 12-06-2019, 02:05 PM
RE: Electrolyser Modelling - by MohammedAbiAfthab - 06-07-2019, 01:15 AM
RE: Electrolyser Modelling - by Antti-L - 06-07-2019, 04:06 AM
RE: Electrolyser Modelling - by Antti-L - 08-07-2019, 02:44 PM
RE: Electrolyser Modelling - by MohammedAbiAfthab - 08-07-2019, 04:11 PM
RE: Electrolyser Modelling - by Antti-L - 08-07-2019, 04:18 PM
RE: Electrolyser Modelling - by MohammedAbiAfthab - 08-07-2019, 05:34 PM
RE: Electrolyser Modelling - by Antti-L - 08-07-2019, 06:09 PM
RE: Electrolyser Modelling - by MohammedAbiAfthab - 08-07-2019, 06:38 PM
RE: Electrolyser Modelling - by MohammedAbiAfthab - 29-08-2019, 05:17 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)