IEA-ETSAP Forum
Day/night storage, How to charge only in specific timeslice? - Printable Version

+- IEA-ETSAP Forum (https://iea-etsap.org/forum)
+-- Forum: Model Generators (https://iea-etsap.org/forum/forumdisplay.php?fid=2)
+--- Forum: TIMES (https://iea-etsap.org/forum/forumdisplay.php?fid=8)
+--- Thread: Day/night storage, How to charge only in specific timeslice? (/showthread.php?tid=237)



Day/night storage, How to charge only in specific timeslice? - anik_ier - 26-01-2024

Hi, How to model a day night storage that can be charged only in specific time slice, which parameter to use in ANSWER? As per Documentation, in such case discharging can occur then only other time-slices other than charging time slice. It could be really helpful to model a electric vehicle which can not operate while charging! Thanks in advance.


RE: Day/night storage, How to charge only in specific timeslice? - Antti-L - 28-01-2024

See the Documentation, Part II, section 4.3.3 Day/Night storage (PRC_NSTTS). I'm sure it's supported by ANSWER. Charging/discharging flows can be bound to zero in individual timeslices also by STGIN_BND and STGOUT_BND.


RE: Day/night storage, How to charge only in specific timeslice? - anik_ier - 29-01-2024

Thanks a lot. I found it and it is supported by ANSWER.